- Is a quarter more than a half?
- Is a 8 or 10 screw bigger?
- What is bigger 1 2 or 3 4 yes or no?
- What fraction is bigger 1/4 or 3 4?
- Is 1/8th bigger or smaller than 1 4?
- Is 0.25 or 0.5 higher?
- Is 0.5 and 0.50 the same?
- What fraction is bigger 3 4 or 5 8?
- What fraction is 3/8 equivalent to?
- Is a quarter bigger than 3 8?
- What is bigger 3/8ths or 1 2?
- What is smaller than a 1/4 inch?
- How can you tell which fraction is smaller?
- How do you determine which fraction is greater or smaller?
- Whats bigger 7/16 or 1/2 inch?
- Is a #14 screw the same as 1 4?
- What size is bigger than 3 8?
- What is 0.25 as a fraction?
- Is 0.2 or 0.22 greater?

## Is a quarter more than a half?

No.

a quarter is smaller than a half.

Which means a quarter is not more than a half..

## Is a 8 or 10 screw bigger?

In the Imperial system of units, a number 10 machine screw (0.190 inch major diameter) is bigger than a number 8 machine screw (0.164 inch major diameter). The 8 is larger than the 10.

## What is bigger 1 2 or 3 4 yes or no?

Answer: Yes, 3/4 is bigger than 1/2. You can confirm this by converting both fractions to decimals. The decimal 0.75 is bigger than 0.5, so 3/4 is bigger than 1/2.

## What fraction is bigger 1/4 or 3 4?

As you saw, if two or more fractions have the same denominator, you can compare them by looking at their numerators. As you can see below, 3/4 is larger than 1/4. The larger the numerator, the larger the fraction.

## Is 1/8th bigger or smaller than 1 4?

Therefore, 1/4 is greater than 1/8 and the answer to the question “Is 1/4 greater than 1/8?” is yes. Note: When comparing fractions such as 1/4 and 1/8, you could also convert the fractions (if necessary) so they have the same denominator and then compare which numerator is larger.

## Is 0.25 or 0.5 higher?

0.5 is larger than 0.25 because 0.5 can also be written as 0.50 which is greater than 0.25. 50 is greater than 25. 0.5….

## Is 0.5 and 0.50 the same?

In mathematics, zeroes before the decimal point and trailing zeroes does not add any value to the number. So, . 5 = 0.5 = 0.50. So ,its mathematically correct to write 0.5 as .

## What fraction is bigger 3 4 or 5 8?

These are all the same questions with one answer. 0.75 is greater than 0.625. Therefore, 3/4 is greater than 5/8 and the answer to the question “Is 3/4 greater than 5/8?” is yes.

## What fraction is 3/8 equivalent to?

6161 Answer. A fraction that is equivalent to 38 is 616 .

## Is a quarter bigger than 3 8?

Therefore, 1/4 is not greater than 3/8 and the answer to the question “Is 1/4 greater than 3/8?” is no. Note: When comparing fractions such as 1/4 and 3/8, you could also convert the fractions (if necessary) so they have the same denominator and then compare which numerator is larger. Is 1/4 greater than 3/9?

## What is bigger 3/8ths or 1 2?

1/2 is bigger than 3/8. … To make the denominator of each fraction equal, multiply both the denominator and numerator of 1/2 by 4 to make it 4/8 which makes the denominator of each fraction 8 .

## What is smaller than a 1/4 inch?

Understanding Screw Sizes – Inch Standards Screws with a diameter smaller than 1/4″ have a nominal size indicated by a number (e.g. #8 or #10).

## How can you tell which fraction is smaller?

As the denominator gets larger, the fraction gets smaller. To compare fractions with like numerators, look at the denominators. The fraction with the smaller denominator is the larger fraction.

## How do you determine which fraction is greater or smaller?

If the denominators are the same, then the fraction with the greater numerator is the greater fraction. The fraction with the lesser numerator is the lesser fraction. And, as noted above, if the numerators are equal, the fractions are equivalent. Use < or > to compare the two fractions and .

## Whats bigger 7/16 or 1/2 inch?

7/16 and 1/2 can be written as 7/16 and 8/12, hence 1/2 is bigger than 7/16. 1/2 inch is 8/16 so it is bigger by 1/16.

## Is a #14 screw the same as 1 4?

(Diameters #12 and #14 may also be found, but are usually on older equipment and needed for repairs or restorations. #14 is close to, but not exactly the same as, 1/4-inch.) The major diameter in Unified threads = 0.060″ + 0.013″ x (numbered diameter). So #2 has a major diameter of 0.086″.

## What size is bigger than 3 8?

Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric3/8″9/16″14mm7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm39 more rows

## What is 0.25 as a fraction?

The decimal 0.5 represents the fraction 5/10. The decimal 0.25 represents the fraction 25/100.

## Is 0.2 or 0.22 greater?

Expert Answers info However, the distance between two consecutive numbers keeps getting smaller. In fact, it gets 10 times smaller each time. So 0.222 is 10 times closer to 0.22 as 0.22 is to 0.2, and so on.